Boretech Cu+2 Copper Remover

Bore Tech Cu⁺² Copper Remover™ uses a revolutionary and patented chemical technology that rapidly removes copper fouling and is 100% barrel safe, odor free, and biodegradable. Cu⁺² Copper Remover’s cutting-edge formulation is ammonia free and removes heavy copper fouling faster than the competition without the safety hazards, harmful toxicity, and offensive odors found in petro-ammonia based solvents.

Leiðbeiningar:

1. UNLOAD FIREARM
2. Wet 3 to 4 Bore Tech X Count patches with Cu⁺² Copper Remover and individually push through bore to remove loose fouling. Only push patches through the bore in ONE direction.
3. Next, make 10 to 15 passes with a tight fitting Bore Tech Proof-Positive Nylon brush saturated with Cu⁺² Copper Remover.
4. Then repeat Step 1 and let Cu⁺² Copper Remover soak for 3 to 5 minutes. For badly fouled rifles, extended soak times may be needed.
5. Finally, push dry patches through the bore until they come out clean.
6. Repeat above steps if necessary.
7. Before storing firearm, dampen a patch with Cu⁺² Copper Remover and push through bore. This will protect against rust/corrosion for up to 2 weeks under normal storage conditions.
8. For extended storage or in adverse conditions apply Bore Tech Friction Guard XP Gun Oil.
9. Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.

Cu⁺² Copper Remover’s proprietary formulation and cleaning process is designed for one thing; continued, rapid and complete extraction of all copper fouling in your firearm’s bore. The key to the Cu⁺² Copper Remover’s unparalleled copper removing capabilities is an industry unique two-step process.

In the first step, the Cu⁺² Copper Remover rapidly oxidizes and breaks down copper fouling by reconfiguring its electronic state. Once the copper fouling is oxidized in step one, a specially enhanced binding agent within the Cu⁺² Copper Remover’s formulation acts like a magnet capturing the copper and rendering it unable to redeposit in the firearms bore. This exclusive technology allows for the complete extraction of copper fouling at full strength without becoming saturated and losing effectiveness.

Our copper solvent is 100% ammonia-free and barrel safe. It will not etch or harm barrel steels and can be safely left to soak in the bore for an infinite period of time. In addition, the Cu⁺² Copper Remover also contains a short-term rust preventative, which shields and conditions the firearm’s bore after cleaning. Just dampen your last patch with Cu⁺² Copper Remover and your bore will be protected against rust and corrosion for up to 2 weeks.

Simply put, Bore Tech’s Cu⁺² Copper Remover works faster and better without the fear of barrel damage and the dreadful ammonia smell.